The ebm-papst R3G355-AI56-01 is a high-efficiency RadiCal® Backward Curved Centrifugal Fan with an integrated EC (Electronically Commutated) Motor. This type of fan applications requiring high airflow against high static pressure, offering significant energy savings and precise speed control compared.

Benefits of the EC Technology

• High Energy Efficiency: EC motors are permanent magnet motors with integrated electronics, allowing them to operate at efficiency levels far surpassing standard AC motors, especially at partial loads.
• Variable Speed Control: Speed can be precisely and easily controlled via a low-voltage analog signal 0-10VDC or a digital PWM signal, enabling the fan to meet the exact cooling or ventilation demand.
• Low Noise: The optimized aerodynamics of the RadiCal impeller and the smooth speed regulation of the EC motor result in significantly lower operating noise.

Typical Applications

• HVAC for Air handling units (AHUs) and rooftop ventilation.
• Where precise airflow control is mandatory.
•  Large server racks or industrial enclosures requiring high cooling capacity.
• This fan is often employed in systems designed to meet stringent energy efficiency standards.

The post Ebmpapst R3G355-AI56-01 Centrifugal Fan 380~480VAC 2200RPM 950W appeared first on Automation Products Supplier Company in Bangladesh.

1.  Key Functions and Features

• Standard Parameters: Voltage (V), Current (A), Frequency (Hz).
• Power Parameters: Active Power (kW), Reactive Power (kVar), Apparent Power (kVA).
• Energy Parameters: Active Energy (kWh), Reactive Energy (kVarh), and various tariff registers.
• Power Quality: Measures Power Factor (PF) and is capable of measuring Total Harmonic Distortion (THD) for voltage and current.

2.     Advanced Communication and Networking

• Protocols: Supports standard industrial communication protocols like Modbus RTU (over RS-485) and often includes Modbus TCP (over Ethernet).
• Data Logging: It typically includes internal memory for historical data logging (e.g., maximum demand, minimum voltage, energy consumption profiles).
• Alarm/Event Recording: Records system events like power outages, overcurrents, or voltage imbalances.

3.     Energy Management Applications

• Demand Control: Monitors and manages peak electricity demand to help reduce utility costs.
• Cost Allocation: Enables precise measurement of energy consumption per machine, department, or process for accurate cost allocation.
• Predictive Maintenance: By monitoring power quality and load profiles, it can help predict potential failures in downstream equipment.

The post LS Electric Digital Power Meter GIMAC-iEX appeared first on Automation Products Supplier Company in Bangladesh.

Industrial-grade memory card readers, writers, and programmers are specialized tools designed for the demanding requirements of embedded systems, industrial PCs, PLCs, and rugged applications. They offer features like high reliability, data integrity verification, wide media support, and robust construction that differentiate them from consumer-grade readers.

Key Features:

• High Speed: Optimized for fastest possible read/write speeds, often reaching theoretical limits of the media (CompactFlash & microSD for SATA III CFast).
• Simultaneous Copying: Can program high speed copying cards at once.
• Bit-for-Bit Verification: To industrial ensures every bit of data is written and verified correctly to prevent corruption.
• Standalone Operation: Often runs without a host PC, offering faster, dedicated performance.

The post Industrial Grade Memory Card Reader and Writer Programmer appeared first on Automation Products Supplier Company in Bangladesh.

The Industrial Grade CompactFlash (CF) Card is a highly ruggedized, reliable, and durable memory storage device based on the Parallel ATA (PATA) interface. It is specifically engineered to meet the stringent demands of industrial and embedded computing environments, unlike consumer-grade cards.

Key Industrial Features

Capacity and Usage

The range of capacities you listed (2GB to 256GB) is typically covered by different industrial product lines, chosen based on the endurance needs. Industrial CF cards are widely used in PLCs, IPC & HMI terminals, embedded systems, and single-board computers etc

The post Industrial Grade CompactFlash (CF) Memory Card 2GB to 256GB appeared first on Automation Products Supplier Company in Bangladesh.

The Swissbit Industrial CFast Memory Card combines the small form factor of CompactFlash (CF) cards with the high-speed Serial ATA (SATA) interface, creating a robust Solid State Drive (SSD) specifically engineered for demanding embedded and industrial computing applications.

Swissbit offers various CFast series (like F-800, F-60, F-50) to cover the full range of capacities you listed, often using different NAND flash technologies (SLC, pSLC, or MLC) to meet specific endurance requirements. The industrial-grade CFast memory cards from Swissbit — including some that match the capacities you listed (2 GB, 4 GB, 8 GB, 16 GB, 32 GB, 48GB, 64 GB, 128 GB, 256 GB).

What Swissbit Industrial CFast Cards Are

Swissbit makes CFast 2.0 cards — small removable SATA-based SSDs in CFast form factor (approx. 36.4 × 42.8 × 3.6 mm) for industrial / embedded use (harsh environments, vibration/shock, wide temperature ranges, etc.).

Common Card Series & Supported Capacities

All Swissbit industrial CFast card SKUs (with capacities, flash type, interface spec, card model), as of now (2025) — that way you’ll have a reference to choose exactly the right card.

The post Industrial Swissbit Cfast Memory Card 2GB-256GB appeared first on Automation Products Supplier Company in Bangladesh.

• Product Model: PCTG-9014 (Canbus 2.0 A/B)
• Product Model: PCTG-9024 (CanOpen)
• Product Model: PCTG-9034 (DeviceNet)
• Purpose: The PROFIBUS bus side and PROFIBUS slave devices to connect to the CAN network

DeviceNet networks:

• Uses a 32-bit micro-controller with a frequency up to 80MHz.
• Supports communication with Profibus DP-V0 slave stations
• Profibus transmission rate up to 3Mbps, CAN transmission rate up to 1Mbps
• Profibus and CAN signals have a 2500Vrms high-speed magnetic coupling isolation
• Profibus, CAN, and power supply terminals are electrically isolated, and all three ports have 600W lightning and surge protection capabilities

Summery:

This Profibus to CAN protocol conversion gateway is used for conversion between Profibus DP protocol and CAN, CANOpen, and DeviceNet protocols. The gateway acts as a master station on the Profibus bus side Profibus slave devices (such as DP protocol meters, E+H flow meters, etc.)

The post ProfibusDP Master CAN Protocol Gateway PCTG-9014 appeared first on Automation Products Supplier Company in Bangladesh.

Thermal-magnetic device circuit breaker 0916605 of Thermal-magnetic device circuit breaker UT 6-TMC M 2A. Thermal-magnetic circuit breaker, 1-pos., for DIN rail mounting. The Phoenix Contact UT 6-TMC M 2A (Part Number: 0916605) is a Thermomagnetic Device Circuit Breaker. It is a single-pole protective device designed for DIN rail mounting, offering protection against both overcurrent (thermal) and short circuits (magnetic).

Technical Specification:

The post Thermal-magnetic device circuit breaker Phoenix Contact 0916605 UT 6-TMC M 2A appeared first on Automation Products Supplier Company in Bangladesh.

The Rittal SK 3370.910 is a Compact Cooling Unit designed for cooling electrical enclosure cabinets. Based on the available Rittal product information for Compact Cooling Units in the SK series, here are the general specifications for the Model SK 3370.910

Technical Specifications for Rittal SK 3370.910

• High Performance-to-Price Ratio: Offering good cooling capacity for the cost.
• Digital Display Controller: For temperature and alarm management.
• Slim Design: Allows for external or partial internal mounting on the enclosure.
• Safety Features: Often includes an alarm signal output.

Summery:

Rittal constantly updates its product lines. If you need to purchase or service this specific unit, I highly recommend checking the official Rittal datasheet or manual for the exact product number SK 3370.910 to confirm the precise cooling capacity, voltage, and dimensions, as there can be variations across generations or specific market models.

The post RITTAL SK3370.910 Electrical Panel enclosure cooling unit appeared first on Automation Products Supplier Company in Bangladesh.

The NANOTEC SMC32-3 Miniature Microstep Constant Current Driver is a compact, high-performance stepper motor controller designed for industrial automation and motion control applications.

Specification:

The post NANOTEC SMC32-3 MINIATURE MICROSTEP CONSTANT CURRENT DRIVER appeared first on Automation Products Supplier Company in Bangladesh.

The SEMIKRON SKIIP83AC12IT1 is a highly integrated IGBT Power Module. The Semikron Key to Intelligent Power indicates it is an Intelligent Power Module (IPM) that combines an IGBT module with an integrated gate driver and protection circuitry into a single compact package. This makes it an ideal building block for motor drives and other power conversion applications

Key Specifications:

• Module Type: Intelligent Power Module (IPM) with an integrated gate driver.
• Topology: Converter-Inverter-Brake (CIB) configuration. This means it includes a three-phase input rectifier, a brake chopper, and a three-phase inverter, all in one module.
• Voltage Rating: 1200V.
• Current Rating: 83A (some sources cite a nominal collector current of 50A for the inverter).
• Integrated Features: Includes a built-in NTC (Negative Temperature Coefficient) temperature sensor for monitoring and protection.
• Variable Frequency Drives (VFDs) and AC Motor Drives
• Servo control systems Drive
• Uninterruptible Power Supplies (UPS)
• Renewable energy systems (solar and wind inverters)

The post SEMIKRON IGBT POWER MODULE SKIIP83AC12IT1 appeared first on Automation Products Supplier Company in Bangladesh.