• Evaluation unit for PT100/PT1000 temperature sensors TP9237
• For the signal evaluation of temperature sensors and resistance thermometers
• Reduced mounting complexity and error sources compared to head transmitters
• Automatic recognition of the connected sensor type
• Full potting and robust connection technology for high vibration resistance

The post IFM PT100 PT1000 Temperature Sensors TP9237 appeared first on Automation Products Supplier Company in Bangladesh.

The post LEM CT Current Voltage Transducer Measurment HAS200-S appeared first on Automation Products Supplier Company in Bangladesh.

The LEM Current Transformers (CT) models are LF1005-S/SP36, and LF505-S/SP27 are specially devices used for measuring alternating current (AC) in VFD-Inverters applications.

LEM LF1005-S/SP36:

• Primary Current (I): Up to 1000 Amper
• Secondary Current (I): Standardized to either 1A or 5A, depending on the specific configuration
• Frequency Range: Typically, 50/60 Hz, but some models can measure a broader range
• Accuracy Level: Accuracy to 0.5 or Class 1 with indicating the precision of the measurement
• Application: Suitable for high-current measurements in industrial settings, large Kilo-watt Inverter-vfd

LEM LF505-S/SP27:

• Primary Current (I): Up to 500 Amper
• Secondary Current (I): Secondery current in CT 1A or 5A, depending on the specific configuration.
• Frequency Range: But some models can measure a broader range.

Common Features & Application:

• The Safety and Insulation: Special designed to meet international safety standards
• Mounting Options: Various mounting options to fit different installation needs for VFD specially.
• Output Signal to CPU: Proportional to the primary current signal send CPU to measurment for Amper Calculation
• Power Monitoring: Power monitoring systems for accurate measurement of electrical consumption
• Protection Systems: Integral to protection relays and systems that safeguard electrical systems
• Industrial Automation application: Mostly used process control and automation systems for monitoring and controlling current flow and Variable Frequency Drive (VFD) power and Motor controlling

The post LEM Current Transformer (CT) LF1005-S/SP36 & LF505-S/SP27 appeared first on Automation Products Supplier Company in Bangladesh.

The model S-20 offers ceaseless estimating ranges between 0… 10 psi and 0… 20,000 psi (0 … 0.4 and 0 … 1,600 bar) in all normal design units. Vacuum and compound reaches are like wise accessible. The WIKA S-20 0 40BAR Pressure Transmitter listed pressure ranges are also available in kg/cm2, kPa and MPa. Special measuring ranges between 0 … 10 and 0 … 20,000 psi ( 0.4 -1600 bar) are available on request. Special pressure ranges may have reduced long-term stability and increase temperature errors.

WIKA S-20 0 40BAR Pressure Transmitter 

The recorded strain ranges are like wise in kg/cm2, kPa and MPa. Unique esti mating ranges between 0 … 10 and 0 … 20,000 psi ( 0.4… 1600 bar) are on demand. Unique strain reaches might have decreased long haul security and expanded temperature blunders. Overpressure limit as far as possible relies upon the particular sensor coment for the chose pressure range.

The post WIKA S-20 0 40BAR Pressure Transmitter appeared first on Automation Products Supplier Company in Bangladesh.

Current observing transfers forestall issues due to overcurrent or inclination. The ongoing checking hand-off will initiate, flagging a caution or switch off the progression of energy through the circuit. The Weidmueller WAS1 CMA series are current monitoring relays designed to monitor both AC and DC currents.

Weidmueller WAS1 CMA 1/5/10A model:

• Current Monitoring Range: Capable of monitoring currents up to 1A, 5A, or 10A.
• AC/DC Monitoring: Suitable for both alternating current (AC) and direct current (DC) applications.
• Adjustable Thresholds: Threshold values for the current can be adjusted to suit specific requirements.
• Compact Design: Fits easily into control panels and enclosures.

Technical Specifications:

• Operating Voltage: Typically 24V DC, but other models may support different voltage ranges.
• Measuring Range: 1A, 5A, or 10A, depending on the specific model.
• Relay Contact: Usually includes a single-pole double-throw (SPDT) relay.
• Mounting: DIN rail mounting for easy installation in control panels.

The post AC DC Current Monitoring Relay Weidmueller WAS1 CMA 1/5/10A appeared first on Automation Products Supplier Company in Bangladesh.

The DEW POINT MOISTURE SENSOR STX-60/20 is a sensor used in PlasticSystem dryers for measuring the dew point temperature of the air. Here’s an overview of its features, specifications, and applications:

Key Features:

• Measurement Principle: Utilizes a sensor probe to measure the dew point temperature of the air.
• Dew Point Measurement: Provides accurate measurement of the temperature at which moisture begins to condense from the air, indicating the moisture content.
• Sensor Type: Typically employs a capacitive sensor element for precise dew point detection.
• Display: Some models may include a digital display to indicate the measured dew point temperature.
• Output: Provides output signals (analog or digital) for integration with dryer control systems or PLCs.

Specifications:

• Model: STX-60/20 (specific model details may vary)
• Measurement Range: Typically ranges from -20°C to +60°C for dew point temperature.
• Accuracy: High accuracy in dew point temperature measurement, crucial for ensuring proper moisture control in plastic drying processes.
• Response Time: Rapid response to changes in dew point temperature.
• Operating Conditions: Designed to operate reliably in industrial environments with varying temperatures and humidity levels.

Installation and Operation:

• Installation:
  • Mount the STX-60/20 sensor probe in the air flow path of the plastic dryer system.
  • Ensure proper positioning to accurately measure the dew point temperature of the drying air.
• Integration:
  • Connect the sensor outputs to the control system of the PlasticSystem dryer.
  • Calibrate the sensor as per manufacturer’s instructions to ensure accurate dew point measurement.
• Operation:
  • Monitor the dew point temperature displayed by the sensor to maintain optimal drying conditions.
  • Adjust dryer settings based on dew point readings to achieve desired moisture levels in plastic materials.

Summery:

Specific to the DEW POINT MOISTURE SENSOR STX-60/20 from PlasticSystem. This documentation will provide comprehensive guidance on setting up and effectively using the sensor in your plastic drying application.

The post DEW POINT MOISTURE SENSOR STX-60/20 PlasticSystem Dryer appeared first on Automation Products Supplier Company in Bangladesh.

Description of pressure transmitter:

Danfoss pressure transmitter which is use industrial Process control system. There is output value is 4-20mA also input power voltage is 10-36VDC. It is high quality and high performance precision signal for this reason showing the accurate pressure measurement.

The post Danfoss Pressure Transmitter 0-100 bar 4-20mA appeared first on Automation Products Supplier Company in Bangladesh.

Water, herbal gas, steam, mineral oil, chemicals are state-of-the-art fluids that need to be measured day in, day out. There is no single, across-the-board technology best for this kind of program. so that you can choose the flowmeter for your best method.

Float metering has superior into trendy new fields state-of-the-art application in latest years. Clients can choose lots of measuring concepts like – electromagnetic measuring modern-day volume glide, mass float-based Coriolis, or thermal precept. Measuring state-of-the-art quantity glide based on the vortex or ultrasonic principle. Electromagnetic, Vortex, Coriolis, thermal, Ultrasonic type flow control meter in our ready stock.

63FS15-D2w01a10b2a endress+hauser flow meter

•  Max. 750 kg/min (Max.) 40 bar –40 to +125 °C.
•  Process connections: Flanges EN (DIN), ANSI.
•  Modbus RS485, pulse/ frequency/switch output.
•  For liquefied natural gas (LNG) LNG mass
•  Process connections: Flanges EN (DIN), ASME
•  RS485 of Modbus
•  Need high vibration resistance

The post Endress+hauser flow meter process control Instrument 63FS15-D2W01A10B2A appeared first on Automation Products Supplier Company in Bangladesh.

Type series

• HDA 4000, for mobile and stationary hydraulics, optional CANopen-Ability or HART,
• depending on the version. HYDAC Pressure Transducer
• explosion-hazard environments with ATEX, CSA, IECEx approval,
• for applications with increased functional security in accordance with EN ISO 13849-1
• with front-flush membrane, approval for shipbuilding and offshore

The post HYDAC Pressure Transducer for liquid for industrial machinery sales price in bd appeared first on Automation Products Supplier Company in Bangladesh.

However, or position in various industrial applications. Moreover, these transducers use a non-contact measurement principle. In other words, which means that there is no physical contact between the sensor and the object being measured.

The Germanjet-19 series transducers use a magnetostrictive. In other words, sensing technology that involves a moving magnet and a stationary sensing element.

Therefore, In summary, the Germanjet-19 series non-contact position transducers are high-performance devices. Moreover, that provide precise and reliable measurements of linear displacement or position in industrial applications.

German jet-19series non-contact position transducer

The transducer is available in hydraulic rod style, aluminum profile. Moreover, and detachable model. All models rated for IP67 which. Therefore, offers full auspice against outside agents for use in astringent environments with high contamination and the presence of dust

The post Germanjet-19series non contact position transducer sales service in bd appeared first on Automation Products Supplier Company in Bangladesh.