Repairing and maintaining a Variable Frequency Drive (VFD) or Inverter requires careful handling and technical expertise. Here are general guidelines and steps for repairing and performing maintenance on a VFD or Inverter:

Specification and Safety:

• Ensure Power Safety: Before starting any work, ensure that power to the VFD is safely disconnected to prevent electrical hazards. Follow lockout/tagout procedures and use appropriate personal protective equipment (PPE).
• Technical Expertise:
  • VFD repair and maintenance should ideally be performed by qualified technicians or professionals familiar with electrical systems and VFD operation.

Steps for VFD Repair and Maintenance:

• Visual Inspection:
  • Conduct a visual inspection of the VFD to check for any physical damage, loose connections, or signs of overheating (e.g., burnt components, discoloration).
  • Inspect cooling fans and vents for dust accumulation that can hinder airflow.
• Check Input Power:
  • Verify the input power supply voltage and frequency are within the VFD’s specifications.
  • Use a multimeter to check for proper voltage levels and phase balance.
• Inspect Control Wiring:
  • Examine the control wiring for any loose connections, damaged wires, or corrosion.
  • Ensure all control signals (start/stop, speed reference) are correctly connected.
• Review Parameter Settings:
  • Access the VFD’s parameter settings using the programming keypad or software interface.
  • Verify that parameters are configured correctly based on the motor specifications and application requirements.
• Perform Functional Testing:
  • Energize the VFD (after ensuring safety precautions) and perform functional testing.
  • Test motor operation at various speeds and load conditions to check noise.
• Check Fault Codes:
  • Review the VFD’s fault history or diagnostic codes to identify any recurring issues or error conditions.
  • Address and troubleshoot fault codes as needed based on the VFD’s user manual or technical documentation.
• Inspect Cooling System:
  • Ensure that the VFD’s cooling system (fans, heat sinks) is functioning properly to dissipate heat generated during operation.
  • Clean cooling fans and vents to remove dust and debris that can impede airflow.
• Replace Faulty Components:
  • If identified during inspection, replace any faulty components such as capacitors, diodes, or IGBT modules.
  • Use manufacturer-approved replacement parts to maintain VFD reliability.
• Calibration and Testing:
  • Calibrate the VFD settings and parameters based on the motor and load requirements.
  • Use diagnostic tools (e.g., oscilloscope, clamp meter) to verify VFD performance and motor control accuracy.

Professional Assistance:

For complex repairs or issues beyond basic troubleshooting, consider consulting with the VFD manufacturer’s technical support or authorized service center.The Professional repair services may involve specialized equipment and expertise to diagnose and resolve VFD faults effectively.

Regular Maintenance:

Implement a regular maintenance schedule for VFDs to prevent issues and prolong equipment lifespan. Perform preventive maintenance tasks such as cleaning, lubrication, and parameter checks according to the manufacturer’s guidelines.

By following these steps and safety precautions, you can effectively repair and maintain a Frequency Converter VFD or Inverter, ensuring reliable operation and optimal performance in industrial applications. If you are not confident in performing these tasks yourself, consider engaging qualified professionals for VFD repair and maintenance services.

For more information please contact us we are the biggest industrial automation importer in Bangladesh for more information please follow us on BD Engineering Solution Facebook

The post How to repair maintenance of Frequency Converter VFD-Inverter? appeared first on Automation Products Supplier Company in Bangladesh.

1. Upload the program file of the HMI to the USB disk, and then copy it to the PC (or use the file on the USB disk directly)

2. Check out the file that was previously copied from the HMI in the file browser. The original file doesn’t have an extension file name.

3. Add the extension file name “xob” or “exob”

4. Run EasyBuilder Pro, select “Tool / Decompile”. The “Decompile” dialog pops up.

5. Click the “Browse” button, and find the .xob file that has been added extension name in the previous step.

6. When the .xob file is selected, make sure that the decompile password must be the same as the upload password. Click the “Decompile” button to start to decompile. When the “succeeded” a message appears the de-compilation is completed. Click “Exit” to leave.

7. After de-compilation, open the file that was being decompiled (which now becomes *.mtp file). You can edit it using EasyBuilder Pro now.

8. Open the .mtp file, the editing environment as your wish. As like as same system of exob file decompilation. There has shown decompile error or prohibited password protected please communicate with below helpline for both of solution (xob, exob decompilation)

9. Decompiling .xob and .exob files from a Weintek Weinview HMI can be useful for accessing and understanding the project files created using EasyBuilder Pro software. These files contain the project data, including screen layouts, scripts, and configurations. Here are the general steps to decompile these files:

Requirements

1. Software: You’ll need the EasyBuilder Pro software installed on your computer. This software is used to create projects for Weintek HMIs and can also be used to decompile .xob and .exob files.
2. USB Connection: Ensure your Weintek HMI device is connected to your computer via USB, and the project files (.xob and .exob) are uploaded to the HMI.

Steps to Decompile .xob and .exob Files

1. Open EasyBuilder Pro:
   • Launch the EasyBuilder Pro software on your computer.
2. Connect to HMI:
   • Connect your Weintek HMI device to your computer via USB. Ensure the device is recognized by your computer.
3. Open Project:
   • In EasyBuilder Pro, go to File > Open and navigate to the location where the project files (.xob and .exob) are stored on your HMI device.
4. Decompile Project:
   • Once you’ve opened the project from the HMI device, EasyBuilder Pro should automatically decompile the .xob and .exob files into a format that you can edit and view within the EasyBuilder Pro environment.
   • The decompiled project will allow you to see the screens, objects, scripts, and configurations that were used to create the HMI application.
5. Edit or View:
   • You can now edit or view the project as needed within EasyBuilder Pro. This includes modifying screen layouts, adjusting script functions, or reviewing configurations.
6. Save Changes:
   • After making any edits or reviewing the project, save your changes within EasyBuilder Pro.
7. Upload Changes:
   • Once you’ve made your changes, you can upload the updated project back to the Weintek HMI device via USB, following the upload procedure in EasyBuilder Pro.

Notes:

• Backup: Before making any changes, it’s recommended to create a backup of the original .xob and .exob files from the Weintek HMI device.
• Compatibility: Ensure that the version of EasyBuilder Pro you’re using is compatible with the version of the .xob and .exob files you are decompiling.
• Documentation: Refer to the EasyBuilder Pro user manual or Weintek support documentation for detailed instructions and troubleshooting tips.

By following these steps and using EasyBuilder Pro software, you should be able to decompile .xob and .exob files from your Weintek Weinview HMI device, allowing you to modify and manage your HMI project effectively.

Contact us! +8801712506181; bdengineerings@gmail.com

The post How to Decompile weintek-weinview hmi xob & exob File which uploading by usb appeared first on Automation Products Supplier Company in Bangladesh.

CRACK TOOL PASSWORDS .rar – 4 (MB)

• Omron PLC: CPM1A, CPM2, CQM1, CQM1H Series
• Mitsubishi PLC: FX0N, FX1N, FX2N, FX3U, FX3G Series, Q01 and Q02 Series
• HMI Mitsubishi: GOT-GT1020, GOT-GT1050, GOT-GT1055, GOT-F920, GOT-F930, GOT-F940 Series
• Delta PLC: ES, EX, SS, EC, LG
• LS PLC: Master K80S, 120S.
• Siemens: S7-200 all firmware CPU-224,224XP,226 CN, S7-200 Project Password, Siemens Logo! 0BA6, OBA7, OBA8
• AB PLC: ML1000 Series
• Fatek PLC: FB(e), FB(s) Version V4.53 or Lower Level
• FUJI -HAKKO HMI: UG series, V6, V7, V8.
• IDEC HMI: HG2F-SS.
• Vigor PLC: VB series directly scan
• Delta PLC: SS2, SV, ES2, EH, EH3 (With RS232&RS485 connection together and without limitation or disable upload setting)
• Panasonic: [Password ID & Password Upload]: NAIS-FP0, FP1, FP2, FPG, FPX
• Omron: ZEN Series plc Clear Password (Crack)
• Omron: C200H, CP1H, CP1L, CP1E, CJ2M (with SYSMAC WAY connection and without Function Block), CG1G, CJ1M (with Tool bus & SYSMAC WAY connection and without Function Block)
• FUJI: NB series Open Project Password
• Delta: DVP Project Password
• Fatek: FB(e), FBs Project Password
• Pro-face: Project GP Password (File type: PRX and PRN)
• FUJI-Hakko: U2, U3, V4, V5, V6, V7 Project Password, CF Card Password
• Weintek: Crack to XOB and EXOB file
• Hi-tech: V6 Project Password

Pro-face HMI: [Without Disable & Upload setting] GP2000 Series: [GP-2600-TC11; GP-2600-TC41-24V; GP-2501-LG41-24V; GP-2400-TC41-24V; GP-2401-TC41-24V; GP-2300-TC41-24V; GP-2300-SC41-24V; GP-2300-LG41-24V; GP-2301-TC41-24V; GP-2301-SC41-24V; GP-2301-LG41-24V; GP-2401H-TC41-24V; GP-2301H-LG41-24V; GP-2301H-SC41-24V;

GP577 Series: GP-577R-TC11; GP-577R-TC41-24V] GP-2601-TC11; GP-2601-TC41-24V; GP-2500-TC11; GP-2500-TC41-24V; GP-2500-SC41-24V; GP-2500-LG41-24V; GP-2501-TC11; GP-2501-TC41-24V; G2501-SC11; GP2501-SC41-24V; G577R-SC11; G577R-SC41-24V; G477R-EG11; G477R-EG41-24VP; G37W2-BG41-24V;

G77R Series: S400-AG41-24V; S401-AG41-24V; S402-AG41-24V; S403-AG41-24V;
Password Unlock PLC CRACK ALL PLC & HMI V2.2.1

Some of Crack/Unlock Tool Sell and Service as mentioned:

• HMI CRACK PASSWORD ALL HMI V3.0- 120 $
• Unlock Password PLC Mitsubishi FX3U- 50 $
• Unlock Password PLC Mitsubishi A CPU series via AnyDesk-50$
• PLC & HMI Crack tool -400 $
• Password unlock LS Master-k PLC Tool Version v1.0 for (Master-k120s) -50$
• PLC Programming Software and Programmable Logic Controller HMI Display & Keypad-$300
• PLC HMI/SCADA Software for PC based Like AB, Siemens, Omron, GE, and Modbus- $750
• IDEC (.NET) PLC Micro smart drive for HMI / SCADA System- $600

• Allen Bradley MicroLogix1000 1761-L16BWA PLC Trainer with HMI Training Software- $800
• Siemens S7 1200 Analog PLC Trainer with TIA Portal V15 Basic & Visual View HMI- $1500
• HMI Visual View and SCADA Software for AB, Siemens, GE, and Modbus PLCs- $750
• Kloeckner Moeller (.NET) PLC driver for HMI / SCADA-$450
• Visual-View SCADA System /HMI software development/Runtime package Tagline – $750
• AB MicroLogix 1000 [1761-L16BWA] PLC Trainer & Visual View HMI Software- $800
• AB Micro820 PLC Trainer 24VDC Lights & HMI Demo / PLC Software W/ Labs-$825
• Allen Bradley Micrologix 1100 1763-L16BWA Analog PLC & VisualView HMI Trainer-$1,400
• Micrologix 1100 Allen Bradley 1763-L16BWA Analog PLC Trainer & VisualView HMI-$1,525
• Micrologix 1100 Allen Bradley Analog 1763-L16BWA PLC & VisualView HMI Trainer-$1,525
• Micro820 Allen Bradley Analog PLC Trainer kit with PLC & HMI Software for Training-$1,150
• Allen-Bradley Micro820 Analog PLC Trainer with PLC and HMI Software for Training-$1,150
• Unlock Password CPU S7-200 Version 1.0x and 2.0x LV3 and LV4 Tool Update-100$
• Cracks Password PLC Mitsubishi Q series via AnyDesk – 50$
• Password Unlock PLC S7-300 Siemens Tool V1.0- 50 $

• HMI Mitsubishi GT1000 series Unlock Password via AnyDesk- 50$
• Allen Bradley ControlLogix / Compact Logix HMI Ethernet PLC Driver for Visual Basic- $125
• Decompile Weintek Password XOB File- 40$
• Decompile EXOB Weintek HMI file- 80$
• Crack Password PLC KOYO via TeamViewer- 50$
• LS-Master-K Crack Password PLC Tool V1.0 for [Master-K80S] -$50
• Allen Bradley Micro820 Analog PLC Trainer with 2711R-T7T HMI and CCW Version 11-$3,995
• Password PLC Crack [Vigor VB0, VB1, VH] – $50
• Hack Password PLC Delta DVP-EH ES EX EC- $50
• Break Password PLC LS Master-K Tool v1.0 for [Master-K200S] -$50

Unlock Password PLC CRACK ALL PLC & HMI
Read to Passcode:

Omron PLC: [CPM1A, CPM2, CQM1, CQM1H] Mitsubishi PLC: [FX0N, FX1, FX2N, FX3G, FX3U series, Q01, Q02] Mitsubishi HMI: [GOT-GT1020, GT1050, GOT-GT1055, GOT-F920, GOT-F930, GOT-F940] Delta PLC: [ES, EX, SS, EC] LG PLC: [Master K80S, 120S] Siemens: [S7-200 any firmware, 224xp, 224, 226 CN and Germany] Siemens: [Plc Logo! 0BA6, OBA7, OBA8] AB PLC: ML1000 Series
Fatek PLC: [FBe, FBs V4.55 or lower-level case}
FUJI -HAKKO HMI: [UG series, V6, V7, V8] IDEC HMI: HG2F-SS.
Pro-face HMI: [Without Disable Upload Function]

GP-2000 Series: [GP-2600-TC11; GP-2500-SC41-24V; GP-2500-LG41-24V; GP-2501-TC11; GP-2501-TC41-24V; GP-2600-TC41-24V; GP-2601-TC11; GP-2601-TC41-24V; GP-2500-TC11; GP-2500-TC41-24V; GP-2501-SC11; GP-2501-SC41-24V Series] {GP-2501-LG41-24V; GP-2400-TC41-24V; GP-2401-TC41-24V; GP-2300-TC41-24V; GP-2300-SC41-24V}
{GP-2300-LG41-24V; GP-2301-TC41-24V; GP-2301-SC41-24V; GP-2301-LG41-24V; GP-2401H-TC41-24V; GP-2301H-LG41-24V; GP-2301H-SC41-24V}

Vigor PLC: VB series plc
Delta: [SS2, SV, ES2, EH, EH3] (With RS232 and RS485 connection together and without limitation or disable upload setting) Password Upload & ID Password
Clear Password (hacking):
Omron: [C200H, CP1H, CP1L, CP1E, CJ2M] (with SYSMAC WAY connection and without Function Block)
OMRON: CG1G, CJ1M (with Tool bus & SYSMAC WAY connection and without Function Block)
FUJI: NB series Open Project Password

Delta: DVP Project Password crack
Siemens: S7-200 Project Password POU
Fatek plc: FB(e), FBs Project Password
Pro-face: GP Project Password (File type: PRX & PRN format)
FUJI-Hakko: U2, U3, V4, V5, V6, V7 Project Password; CF Card Password
Weintek: Crack XOB and EXOB file
Hitech: V6 Project Password (ADP-PWS5610T-S, PWS1711-ST)

Please Visit to Unlock Service Center: PLC-UNLOCK

The post All PLC & HMI UNLOCK TOOL CRACK SOFTWARE appeared first on Automation Products Supplier Company in Bangladesh.

The SUPERPRO 610P Universal IC Programmer is indeed a versatile tool designed for programming a wide range of programmable devices, including microcontrollers, memory chips, and other integrated circuits (ICs). While the SUPERPRO 610P can be used for legitimate purposes such as device programming and firmware updates, it’s essential to clarify its application specifically for PLC (Programmable Logic Controller) programming services.

Overview of SUPERPRO 610P Programmer:

1. Device Support:
   • Supports a wide range of programmable devices, including EPROMs, EEPROMs, flash memory, microcontrollers (MCUs), GALs, PALs, CPLDs, FPGAs, and more.
   • Compatible with various device packages such as DIP, SDIP, PLCC, QFP, SOP, TSOP, and BGA.
2. Software Interface:
   • Utilizes user-friendly software for device programming, providing options for device selection, file loading, and programming parameters.
   • Supports batch programming and device serialization for efficient production environments.
3. Programming Capabilities:
   • Offers fast and reliable programming of target devices, including erase, blank check, program, verify, and read functions.
   • Supports programming algorithms for various device families and manufacturers.
4. Hardware Features:
   • Equipped with universal pin drivers and multipurpose adapters for handling different device packages.
   • Features a built-in LCD display for status and programming information.

Application for PLC Programming Services:

While the SUPERPRO 610P is primarily intended for programming standalone ICs and microcontrollers, its use in direct PLC programming services may be limited due to the following reasons:

• PLC Firmware and Security: PLCs typically have proprietary firmware and security mechanisms to prevent unauthorized access and modification.
• Manufacturer-Specific Tools: PLC manufacturers provide dedicated software and hardware tools for programming and configuring PLCs, ensuring compatibility, security, and reliability.
• Legal and Compliance Issues: Using third-party programmers like the SUPERPRO 610P for PLC programming may raise legal and compliance concerns, especially regarding warranty, intellectual property, and safety regulations.

Recommendations for PLC Programming:

1. Use Manufacturer-Approved Tools: Follow PLC manufacturer guidelines and use authorized tools and software for programming and configuring PLCs.
2. Consult Authorized Service Providers: Engage with authorized PLC distributors or service providers for professional PLC programming, maintenance, and support.
3. Adhere to Industry Standards: Ensure compliance with industry standards and regulations when performing PLC programming and maintenance activities.
4. Professional Expertise: Seek assistance from qualified automation engineers or certified professionals with expertise in PLC programming and industrial automation.

By adhering to best practices and utilizing approved methods and tools, you can ensure safe and effective programming and operation of PLCs in industrial applications. Avoid using general-purpose IC programmers like the SUPERPRO 610P for PLC programming tasks to maintain system integrity and compliance with industry standards.

The post Universal IC SUPERPRO 610P Programmer for PLC Unlock Service available appeared first on Automation Products Supplier Company in Bangladesh.

What is PLC?

PLC meaning Programmable Logic Controller. PLC is a Microprocessor predicated contrivance that has an Input/output or circuit. Which has to be programmed in advance, that’s the contrivance after receiving input, their program acts as logic, and then according to the sequence to give the output, it’s called plc.

History of a PLC:

At first, Programmable Logic Controller (PLC) is invented by a Modicon company in the US in 1969. Which is kenned as the Sneider Company? Which designation was the Sequence Controller? The device’s prosperity gave ascend to an ecumenical industry that has expanded considerably over the past 30 years. PLCs put astuteness in machines and automated processes utilized in industry, infrastructure, and buildings.

Component of a PLC:

There are many components of PLC.

• Input/Output Card

• Input Sensing Contrivance (Any Type of Sensor)

• CPU (Central Processing Contrivance

• Input/output IC

• Drive IC

• Relay

• Output Card, Etc.

Some of Brand’s name of PLC:

• Siemens
• Mitsubishi
• Delta
• LS
• Omron
• Allen Bradley
• Schneider
• Fatek
• Panasonic

Today I will discuss the Mitsubishi PLC. Nowadays Mitsubishi PLC is being utilized more in industry. So Mitsubishi PLC Training is very paramount for Automation Engineer/ Electrical Engineer/ an edified person / a technical person to do work in the industry. If you are training on a Mitsubishi PLC, Then it will be more facile to work in your industry. If you will prof your technical cognizance on Mitsubishi PLC afore you have to train on that PLC.

Advantages of Mitsubishi PLC :

1. Size is minuscule & shorter project time
2. Less & simple wiring
3. Cost-efficacious for the involute controlling  system
4. Reliability
5. High replication
6. Internal / External control capability
7. It is facile to work for an inculcated person/ Engineers
8. Troubleshooting/maintenance is very facile
9. It is facile communication from PC to PLC with plants etc.

The disadvantage of Mitsubishi PLC:

The disadvantage of Mitsubishi PLC.
The circuit operation is fine-tuned.
Its high cost in facile circuit design.
It is strenuous exertion for an uneducated person/ non-technical person.
Some extension modules must be integrated to maximize flexibility and performance.

Application of Mitsubishi PLC:

• Textile Factories
• Spinning
• Biomedical
• Pharmaceutical
• Chemical
• Aliment Factory
• Cement Factory
• Beverage Companies
• Home Automation
• Industrial Automation
• Robots manufacturing and controlling etc.

Why Mitsubishi PLC Training is Paramount?

Welcome yourself for set up your mind on the cull to commence Mitsubishi PLC training. The phrenic conception is excellent; However, learning PLC is not easy, and not quite complicated. To meet the objective, you have to get yare under the supervision of experienced engineers, who are working in industry or factory for a long time and functioning as an Automation Engineer.

The post PLC-HMI TRAINING AT GAZIPUR-DHAKA appeared first on Automation Products Supplier Company in Bangladesh.