The Allen-Bradley  RSLogix 500 1747-L531 is an SLC Processor for the SLC 500 PLC platform. The product by Rockwell Automation in active service due to their extreme reliability and the massive installed base of SLC 500 hardware. The 1747-L531 is the entry-level CPU within the 5/03 family, defined primarily by its memory capacity.

Technical Specification:

The post Allen Bradley SLC 500 Series PLC CPU 1747-L531 appeared first on Automation Products Supplier Company in Bangladesh.

The WAGO 750-1504 is a high-density, 16-Channel Digital Output Module designed for the modular WAGO I/O System (Series 750). The WAGO 750-1504 is a high-density, 16-channel digital output module designed for the WAGO I/O System 750.

Wago 16-Channel 750-1504

It is one of the most space-efficient modules in the lineup, providing 16 outputs in a housing only 12 mm wide. This module is DC loads such as relays or status indicators directly from a PLC or fieldbus coupler.

Summery:

Because there are 16 outputs in such a small space, the module uses a high-density terminal block layout. All 16 channels share a common 24V power supply provided via the power jumper contacts (the internal bus bars of the I/O assembly).

The post Wago 16-Channel Digital Output Module 750-1504 appeared first on Automation Products Supplier Company in Bangladesh.

The B&R X20AI1744 is a specialized Analog Input Module for the X20 PLC system, specifically designed to interface with Full-Bridge Strain Gauges. This module is critical for applications that require highly precise measurement of force, weight, torque, or pressure where the sensing element is a Wheatstone bridge circuit.

Technical Specification:

The post B&R Analog Input Module X20AI1744 Full-Bridge Strain Gauge Input appeared first on Automation Products Supplier Company in Bangladesh.

The Siemens 6ES7 223-1BM22-0XA8 refers to a Digital Input/Output (DI/DO) module for the discontinued SIMATIC S7-200 series of Programmable Logic Controllers (PLCs). This module is a mixed signal module used to expand the digital I/O capacity of an S7-200 CPU.

Technical Specifications (EM 223)

The module is designated as an EM 223 (Expansion Module Digital) with the following features. The SIMATIC S7-200 family, including the EM 223 expansion modules, has been discontinued by Siemens and is in the product phase-out stage.

The post SIEMENS SIMATIC S7-200 PLC MODULE 6ES7 223-1BM22-0XA8 appeared first on Automation Products Supplier Company in Bangladesh.

The post Schneider Electric analog output module Modicon TM5 TM5SAO2L appeared first on Automation Products Supplier Company in Bangladesh.

The Omron NX-ECC203 is a vital component within the Omron NX-series I/O system. It functions as an EtherCAT Coupler Unit, acting as a bridge between the EtherCAT network and the NX I/O units. The Omron NX-series I/O units. It is typically connected to an EtherCAT master controller.

Key Specifications and Features:

• Module Type: EtherCAT Coupler Unit
• Network Protocol: EtherCAT, a high-performance real-time Ethernet network.
• Functionality: It serves as the gateway for the NX I/O units to communicate on the EtherCAT network. It manages the data exchange between the EtherCAT master and the connected NX I/O slaves.
• I/O Capacity: Can support up to 63 NX I/O units (including other couplers, I/O units, and safety units) in a single EtherCAT network segment.
• Communication Speed: Supports 100 Mbps EtherCAT communication.
• Configuration: Configured using Omron’s Sysmac Studio software, which allows for integrated project development, including PLC logic, HMI design, and motion control.

Product Status:

The Omron NX-ECC203 is an active product. It is a current component of Omron’s NX-series I/O system and is actively manufactured and supported by the company.

The post Omron PLC NX-ECC203 NX-series EtherCAT Coupler appeared first on Automation Products Supplier Company in Bangladesh.

The WAGO-Germany 750-891 is a high-performance programmable controller for the WAGO I/O System 750. It is a key component for industrial automation, functioning as a PLC that can communicate over an Ethernet network using the Modbus TCP protocol.

Key Specifications and Features:

• Function: Programmable Fieldbus Controller. It acts as a head station for a WAGO I/O node, communicating with a master controller via Ethernet/Modbus TCP while controlling the connected I/O modules locally.
• Protocols: Supports a wide range of standard Ethernet protocols, including Modbus TCP/UDP, HTTP(S), FTP(S), DNS, and more.
• Interfaces: It features two RJ45 Ethernet ports with an integrated switch. This allows for simple wiring in a line topology, eliminating the need for an external switch or hub.
• Programming: It is programmable based on the CODESYS V2.3 programming environment
• Memory: Comes with 4 MB of program memory, 4 MB of data memory, and 32 KB of non-volatile memory for retaining data even after a power loss.

Product Summary:

The WAGO 750-891 is an active product. It is a current and widely used part of WAGO’s I/O System 750. The search results show it is listed as a “4th generation” controller, indicating it’s a modern and supported component.

The post WAGO Controller Modbus TCP ETHERNET 750-891 appeared first on Automation Products Supplier Company in Bangladesh.

The Omron Corporation NX-PG0122 is a 1-axis pulse output unit for the Omron NX I/O System. The applications requiring precise motion control, such as driving stepper motors and servo amplifiers with pulse and direction signals.

Key Specifications and Features:

• Function: Pulse Output Unit for motion control.
• Axes: 1-axis pulse output.
• Pulse Output Method: Supports both forward/reverse direction pulse outputs and pulse + direction outputs.
• Control: It provides a PNP open collector output type.
• Compatibility: Designed to integrate seamlessly with the Omron NX-series I/O system.
• Compact Design: The module has a very narrow width of 12 mm, which helps to save space in the control cabinet.

Product Status:

It is a current and essential component of the NX I/O series, which is part of Omron’s modern automation platform. It is widely available through official channels.

The post Omron Pulse Output direction Module NX-PG0122 appeared first on Automation Products Supplier Company in Bangladesh.

The Omron NX-EC0142 is an incremental encoder input unit for the Omron NX I/O System. It is designed to be a high-speed, compact module for precisely reading position information from incremental encoders.

Technical Details:

• Function: Incremental Encoder Input Unit.
• Input Type: 1 channel, with a line driver (RS-422) input type.
• Compatibility: The Omron NX I/O System and can be synchronized with an EtherCAT network for high-speed, deterministic control.
• High-Speed: Capable of reading encoder signals at a maximum frequency of 4 MHz.
• Other Features: Supports various pulse input methods (phase difference, pulse + direction, up/down pulse) and has a built-in 32-bit counter.

Product Application Status:

The Omron corporation NX-EC0142 is an active product. It is a current and essential component of the NX I/O series, which is part of Omron’s modern Sysmac automation platform.

The post Incremental Encoder Line driver Input Omron Module NX-EC0142 appeared first on Automation Products Supplier Company in Bangladesh.

The Siemens S7-200 SMART Digital I/O SB DT04 with 6ES7288-5DT04-0AA0 is S7-200 SMART PLC series. It is designed to be a small, low-cost expansion module that plugs directly into the CPU to add I/O points.

Key Specifications and Features:

• Model: Digital I/O SB DT04
• Part Number: 6ES7288-5DT04-0AA0
• Function: This signal board provides additional digital inputs and outputs to a compatible S7-200 SMART CPU.
• I/O Count: 2 Digital Inputs (DI) and 2 Digital Transistor Outputs (DO).
• Voltage: 24 VDC for both inputs and outputs.
• Output Current: Each transistor output can handle up to 0.75 A.

Summery Status:

The Siemens 6ES7288-5DT04-0AA0 is an active product. The S7-200 SMART series is a popular and current product line from Siemens. Designed to be a simple plug-and-play addition to standard type S7-200 SMART CPU modules. It is not compatible with the compact CR series CPUs.

The post Siemens S7-200 SMART Digital I/O SB DT04 6ES7288-5DT04-0AA0 appeared first on Automation Products Supplier Company in Bangladesh.